Loading...
Serving Union City, CA and surrounding areas. (510) 535-8438
No two yards are the same. We design fences around your actual property - the slopes, the side yards, the HOA rules - and build them to stand up to Union City winters.
Custom fence design in Union City means measuring your actual property, accounting for every slope and corner, and building a fence plan that fits your yard - not a stock panel size - with most residential installations completed in one to three days once permits are approved.
Most Union City homeowners come to us because a standard off-the-shelf fence does not work for their yard. The lot is irregularly shaped, the ground drops on one side, or the HOA has specific requirements about height and materials. Custom fence design is the process of measuring your space, talking through what you actually need the fence to do, and building something that fits - rather than forcing a standard panel layout onto a yard that was never designed for it. If you need a specific enclosure for a pool or spa, our pool fence installation service handles code-compliant designs for those situations.
We work with wood, vinyl, aluminum, chain link, and ornamental iron - so the custom design conversation starts with what you want the fence to accomplish, then moves to the material that best achieves that goal in Union City's climate and soil conditions.
If your posts are visibly pulling out of the ground or sections are tilting, the structure is no longer doing its job. In Union City's clay soil, this kind of movement is common in older fences where posts were not set deep enough to handle the seasonal ground shifts - and it is a clear signal that replacement, not just repair, is needed.
Press your thumb against the lower boards of a wood fence. If the wood feels spongy or crumbles easily, rot has set in - often driven by the ground moisture and fog that Union City gets through the winter months. A fence in this condition cannot be patched back to health; it needs to be replaced with materials suited to these conditions.
A fence that worked for a childless couple may not be safe or secure once a dog, a pool, or a young child enters the picture. Custom design lets you address specific needs - a self-latching gate, a taller enclosure, or a design that eliminates footholds a child could climb - without retrofitting a fence that was never built for those requirements.
If you have had conversations about where your property ends, or if you have noticed landscaping creeping toward your yard, a properly surveyed and installed fence resolves the ambiguity permanently. This is especially relevant in Union City's older subdivisions where original boundary markers may have shifted or become unclear over the years.
Every custom project starts with an on-site visit where we measure the full fence line, note grade changes, check for underground utilities before any digging (California requires contractors to call 811 before every excavation), and talk through your goals. From there we produce a written design and cost estimate before any work begins. We handle permit applications with the Union City Building Division, which requires review time - we factor this into the schedule so there are no delays after you approve the design. For homeowners who want decorative detail alongside function, our ornamental iron fence installation service is often a strong fit for custom front-yard and entry projects.
We install custom fences in all primary residential materials - wood, vinyl, aluminum, chain link, and ornamental iron - so the design conversation starts with what you need the fence to accomplish, not with what material we happen to stock. We also include old fence removal and site cleanup as part of every full-replacement project, so the yard is clean before and after the work is done.
For homeowners who want a fence designed around their actual property before any commitment is made.
For projects requiring city approval - we handle the paperwork so you never need to visit the Building Division.
For sloped or uneven yards where standard panel heights create large gaps at the bottom.
For homeowners who need a specific gate width, latch type, or decorative style as part of the overall design.
For projects combining wood, metal, or other materials for a specific look or function.
Full removal and hauling of the existing fence before new installation begins.
Much of Union City sits on expansive clay soil and Bay mud that swells in winter and shrinks in summer. That seasonal movement can push fence posts out of alignment within a few years if they are not set deep enough and anchored properly in concrete. Proximity to San Francisco Bay also means morning fog, salt-tinged air, and damp winters are a regular part of life here - untreated or poorly sealed wood fences can show rot and warping within just a few years under those conditions. Choosing the right materials for this specific climate is part of every design conversation we have with Union City homeowners. We also design and install custom fences in Fremont and Milpitas, where many of the same soil and climate considerations apply.
Union City's permit process adds time to any new fence project, and the Building Division requires accurate drawings submitted the right way to avoid back-and-forth delays. Neighborhoods built after the 1980s - including parts of the Alvarado area and newer planned communities near Mission Boulevard - often fall under HOA guidelines that restrict fence height, material, and finish. A contractor who is not familiar with this area may submit incomplete plans or miss an HOA requirement, costing you weeks. We know the local process and ask the right questions at the first meeting so nothing slows the project down unnecessarily.
We ask about your yard size, any slopes or obstacles, whether you have HOA guidelines, and what you want the fence to accomplish. This call takes ten to fifteen minutes and helps us come prepared for the site visit.
We walk the perimeter with you, take measurements, note grade changes, and confirm underground utilities will be marked before any digging. This is your chance to share styles you like and ask questions - the more detail you share, the better the design fits what you actually want.
Once you approve the design and sign the contract, we submit the permit application to the Union City Building Division and order materials during the review window. Most permits take a few days to a couple of weeks depending on current city volume - we build this into the schedule so installation starts as soon as approval comes through.
The crew arrives, marks post locations, digs, and sets posts in concrete before attaching panels or boards. For a standard residential yard, installation wraps up in one to two days. We walk the finished fence with you before leaving - check gate function, height, spacing, and ground line - and address anything that needs adjusting on the spot.
We come to you, measure the space, and give you a written design and price - no obligation and no pressure to decide on the spot.
Every custom project starts with a site visit where we measure your actual property and note every grade change, corner, and obstacle. The design we give you is built around what your yard actually looks like - which is why our fences follow the ground cleanly rather than leaving gaps or fighting the terrain.
We have submitted fence permit applications to the Union City Building Division many times and know what the reviewers look for. Accurate plans submitted correctly the first time avoid back-and-forth delays - and we handle all of it so you never have to visit city offices yourself.
Many Union City neighborhoods built after the 1980s have active HOA guidelines covering fence height, materials, and finish colors. We ask about this at the first meeting and flag any approval requirements before installation begins - so you are not dealing with a violation notice after the work is done.
You get a written design, a clear contract, and a full cost breakdown before any post goes in the ground. Nothing starts until you have approved exactly what is being built and what it will cost - no surprises on installation day and no additions to the bill without your agreement first.
A well-designed fence adds real value to a Union City home - both in how it looks and how long it lasts. We bring the local knowledge to make that happen: the right materials for this climate, the right installation method for this soil, and the permit knowledge to make it all legal.
Verify contractor licensing at the California Contractors State License Board. Fence permit requirements in Union City are managed by the Union City Building Division. For HOA-related questions, the California Department of Real Estate maintains resources for homeowners navigating association rules.
Adding a pool to your property? We design and install code-compliant pool enclosures that also complement your home's overall look.
Learn MoreWant a custom fence with lasting curb appeal? Ornamental iron combines decorative detail with the structural durability to handle Bay Area conditions.
Learn MoreCall us or submit a request online and we will respond within 1 business day to schedule your free on-site design consultation.